Beckhoff C6025, Manual

Page: 35 / 45

Maintenance
C6025 35 Version: 1.8
• ESD-compatible work surfaces such as tables and shelves;
• Wrist grounding strap, especially for sedentary activities;
• grounded and electrostatically dissipating equipment and operating materials (e.g. tools) within the
ESD protection zone.
If it is not possible to create an ESD protection zone, you can still protect the device against ESD damage.
For example, the following measures can be used:
• Use conductive mats connected to the ground potential as underlays.
• Dissipate possible charges from your own body by touching grounded metal (e.g. control cabinet door).
• Wear a wrist grounding strap.
• Only remove new electronic components from the ESD packaging (tinted plastic bag) after putting on
the wrist grounding strap.
• Do not walk around with electronic components in your hand if they are not in ESD packaging.
Access to exchangeable device components
You can access the device components to be replaced via the cover on the left-hand side. You gain access
to the battery and the storage medium. To do this, remove the two Torx TX6 screws and take off the cover
(see Fig. 22).
Fig. 22: C6025 _Access to battery and storage media
You now have access to the battery (1) and storage medium (2) (see Fig. 23).
1
2
Fig. 23: C6025 _Battery and storage media