Product Description
Interfaces from C5102-0060
ATX motherboard
interfaces
PS/2 connections
PS/2
The upper PS/2 connector (
X104
) allows a PS/2 mouse to be used, while a
PC keyboard can be connected to the lower PS/2 connector (
X103
).
Serial interfaces
RS 232
COM1 - COM2
The basic version of the Industrial PC has two serial interfaces,
COM1 (
X105
) and COM2, using the type RS 232, which are each brought
to a 9 pin SUB-D plug connector. The interface COM2 is located in the
upper part of the first slot right beside the ATX-slot.
USB interfaces
USB1 – USB4
The four USB interfaces (
X108
–
X111
) are used to connect peripheral
devices with USB connections:
Devices with Intel
®
4
th
generation processors (C33xx-0060) are
equipped with 2 USB2.0 (
X110
,
X111
) and 2 USB3.0 (
X108
,
X109
)
interfaces
Devices with Intel
®
6
th
and 7
th
generation processors (C33xx-0070) are
equipped with 4 USB3.0 interfaces.
Two more USB interfaces are located behind the front flap.
USB2.0 standard
is supported.
Network connection
LAN1
The RJ-45 connector (
X112
) allows the PC to be connected to a
10/100/1000BASE-T Local Area Network (LAN).
LAN2
The RJ-45 connector (
X113
) allows the PC to be connected to a
10/100/1000BASE-T Local Area Network (LAN).
Sound-On-Board
Sound
The Industrial PC has a on-board-interface with the following connectors:
Line In (
X116
), Line Out (
X115
) and Microphone jack (
X114
).
DVI-D (Digital Visual Interface)
DVI-D out
The DVI connectors (
X117
,
X118
) are used for transferring the video
signal. DVI-D standard is supported.
DisplayPort
DisplayPort
The DisplayPort (
X119
) is used for transferring the video signal.
X116
X105
X104
X117
X115
X112
X113
X103
X118
X109
X111
X114
X119
X108
X110
Additional plug-in cards (optional)
Type plate
There is a type plate on the top of the Industrial PC which provides
information about the hardware configuration of the Industrial PC at the
time it was supplied.
10
C5102
