Parameterization and commissioning
BK11x0, BK1250
57
Version: 4.1
Fig. 43: Table 9 with terminal type
SubIndex 1 is the "name" of the coupler itself, the terminals follow from subindex 2. Subindex 0 contains the
number of terminals that were found. Since the subindex 1 contains the coupler name itself, the value in
subindex 0 corresponds to the number of terminals, including the KL9010.
For each KL/KM terminal the type is specified as a 16-bit value based on the following key (see index
)
Terminal type
High byte
Low byte
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
complex terminal (e.g.
analog terminals)
0
terminal type (decimal) from terminal reg. 8
simple digital input/
output terminals
1
process data configuration [bit]
shift register
Extension
1:
KL121
2
1: output
terminal
1: input
terminal
