Parameterization and Commissioning
BC3150
34
Version: 2.1.0
Fig. 27: Data memory mapping
Used code and data memory
Fig.
Code and data memory
(1) "Used PLC code" in %.
Fig.
Code and data memory
(2) "Used PLC data" in %.
Fig.
Code and data memory
(3) "Used PLC source" in %.
Fig. 28: Code and data memory
Other memory
Fig.
Other Memory
(1) "Used Near Heap" is required for the COM interface and SSB. % values.
Fig.
Other Memory
(2) "Used Huge Heap" is required for the ADS communication. % values. This value
should be less than 30 %.
Fig.
Other Memory
(3) "Used File Area" is required for the TwinCAT configuration, the TSM file and the
16 kbyte flash access. % values.
