Documentation notes
Version: 2.1
───
7
AG2400
1.2
Version numbers
Provision of revision levels
On request, you can obtain a list of revision levels for changes in
the operating instructions.
• Send requests to: [email protected]
Origin of the document
These operating instructions were originally written in German. All
other languages are derived from the German original.
Product features
Only the product properties specified in the current operating in-
structions are valid. Further information given on the product pages
of the Beckhoff homepage, in emails or in other publications is not
authoritative.
1.3
Scope of the documen-
tation
Apart from these operating instructions, the following documents are
part of the overall documentation:
Documentation
Definition
Short information about the gear
unit
Accompanying document with
general notes on handling the
gear units. Included with each
product.
Summary of Contents for AG2400
