BECKER
U 4.70-4.100
REPAIR AND SERVICE
MANUAL
04/98
Page 1: ...BECKER U 4 70 4 100 REPAIR AND SERVICE MANUAL 04 98...
Page 2: ...endshield 16 12 Remove pump side motor flange A side endshield 15 13 Slide rotor 3 out of cylinder housing 1 14 Roll unit back onto rubber feet 15 Remove bolts holding oil separator cover 112 on and r...
Page 3: ...se separator 101 17 Reinstall sump cover 64 with new gasket 77 18 Install new oil separator elements 83 and reinstall oil separator cover with new gasket 112 19 Check motor coupling distance and insta...
Page 4: ...ort the rotor above the cylinder 5 Install A side endshield but do not fully tighten bolts 6 Place rotor into cylinder housing making sure that a rotor segment and not a vane slot is resting on the ga...
