Installation
Becker Avionics
REU6100 Functions
72
REU6100
DV64460.03 Issue 11 January 2019
Signal Tones
•
The REU6100 has two signal tones:
o
The intercom request signal.
o
The E-call signal.
•
Both signals can be enabled or disabled by the configuration setup*.
*For more information refer to the software manual "CSW6100... "
www.becker-avionics.com/downloads/
→
Intercom).
Activation Signal Tones
•
The REU6100 can operate with external switches for the signal tones intercom request
and E-call.
Activation - Selective Call
•
The REU6100 has a selective call activation input.
•
This input can be enabled or disabled by the configuration setup*.
Detailed information see ACU610X manuals
www.becker-avionics.com/downloads/
→
Intercom).
*For more information refer to the software manual "CSW6100... "
www.becker-avionics.com/downloads/
→
Intercom).
For special mission configuration some of the discrete inputs can be used for
other functions e.g.:
•
The input selective call to Guard Radio PTT.
Winchman Operation
The winchman function includes VOX-level and volume-level adjustments without access to a control
device.
•
The winchman functionality can be given to any ACU610X or headset (without installed
ACU610X) by the configuration setup.
•
With two external push buttons the VOX-level and volume-level can be remotely controlled
by the winchman operator.
o
Push one of the two external push buttons and the winchman function will be
started.
o
This enables the winchman to increase the VOX-level and the volume-level for his
headset.
•
VOX-level adjustment:
o
Push the VOX-level button for a short time (0.3
...≤
3 s),
the VOX-level is increased until the maximum value is reached.
o
Push the button
≥
3 s,
the VOX-level is reset to the value selected on the related ACU panel.
o
The VOX-level is reset too,
when the volume control or VOX control on the ACU is changed
•
Volume level adjustment:
o
Push the volume level button for a short time (0.3
...≤
3 s),
the volume level is increased until the maximum value is reached.
o
Push the button
≥
3 s,
the volume level is reset to the value selected on the related ACU panel.
o
The volume level is reset too,
when the main volume control or VOX control on the related ACU is changed.
