GT6201
_________________________________________________________________________________________
Page 30
DV 17001.03 Issue 4 01/2015
Display Contents
Description
2. Move the slide bar via the “ROTARY ENCODER” to view any
additional failures.
3. “0” means, no failure has been detected and stored.
4. “1” means, a failure has been detected once or several times
and stored.
To erase all stored failures.
1. Selecting “YES” via the “ROTARY ENCODER”.
2. Press the “STO” push-button to confirm.
Erasing the failure list should not be undertaken by the installer.
The failure list will normally be deleted by factory or maintenance
shop after a repair is completed.
Note:
Menu available on primary controller only.
The factory default settings are the settings of the GT6201 when
it left the factory after production.
To restore the factory settings;
1. Select “YES” via the “ROTARY ENCODER”.
2. PRESS the “STO” push-button to confirm.
Note:
Restoring the factory default settings will overwrite all
previous and customized installation settings!
2.8
F
actory Default Settings
Enabled
Disabled
Selected
De-Selected
Setting name
Value
DEVICE INFO
DIMMING INPUT
NONE
BRIGHTNESS
50%
MEMORY OPTIONS
CHANNEL STORE
STORE LAST CHANNEL
MDE PAGES
STANDBY FREQUENCY
BATTERY VOLTAGE
CHANNEL MEMORY
LOW BATT THR
10.5 V GT6201-05
21.0 V GT6201-10
CONFIG
TANDEM
AUX_IN
AUTO ISOL IN TX
SCAN BEEP
FREQ CHANGE BEEP
SWAP MIKE IC
IN/OUT CFG1
MICROPHONE 1
STD 1 MIKE
STD 2 MIKE
STD 3 MIKE