Becker E16-V1, Assembly And Operating Instructions Manual

Page: 3 / 24

General
These tubular drives are high-quality products with the following features:
• Optimised for sun protection applications with locking system
• freely programmable locking and unlocking limit position
• Automatic detection of upper limit position
• Automatic detection of lower limit position when the locking system is activated
• Easy to set and delete the limit positions using the programming unit
• Several drives can be operated in parallel
• Compatible with existing drives with electronic limit switching (4-core connecting cable)
• Compatible with the comprehensive range of the drive manufacturer’s control units
• Smooth operation of the system and the drive increases the service life
• For plug-in connecting cable
Please observe these Assembly and Operating Instructions when installing and setting up the equipment.
The date of manufacture comes from the first four digits of the serial number.
The numbers 1 and 2 indicate the year and the numbers 3 and 4 indicate the calendar week.
Example: 24th calendar week in 2012
Ser. No.: 1224XXXXX
Explanation of pictograms
CAUTION CAUTION indicates a hazardous situation which, if not avoided, could
result in injury.
ATTENTION
ATTENTION indicates measures that must be taken to avoid damage to
property.
Denotes user tips and other useful information.
Warranty
Structural modifications and incorrect installation which are not in accordance with these and our other instructions can result in
serious injuries, e.g., crushing of limbs. Therefore, structural modifications may only be carried out with our prior approval and
strictly in accordance with our instructions, particularly the information contained in these Assembly and Operating Instructions.
Any further processing of the products which does not comply with their intended use is not permitted.
The end product manufacturer and fitter have to ensure that all the relevant current statutory, official and, in particular, EMC regu-
lations are adhered to during utilisation of our products, especially with regard to end product manufacture, installation and cus-
tomer advice.
3