Becker E16-V1, Assembly And Operating Instructions Manual

Page: 15 / 24

Run the bolt past the locking point and stop the tubular drive. Carry out the following
sequence without interruption between the individual drive commands.
▻ The locking limit position is now saved and the tubular drive makes a "click"
sound to confirm.
1 s 1 s until STOP and hold until
Use the travel button to run the bolt in the open direction until it is engaged by the bolt
mechanism.
▻ The tubular drive switches off automatically.
Run the bolt in the down direction and disengage it from the bolt mechanism, then
stop the tubular drive. Carry out the following sequence without interruption between
the individual drive commands.
▻ The unlocking limit position is now saved and the tubular drive makes a
"click" sound to confirm.
1 s 1 s until STOP and hold until
Limit positioning is now complete.
The sun protection system will now lock and unlock automatically in the lower limit
position when you close and open it.
Deleting the limit positions with a rotary switch or a locking button
The functions and presettings of the model versions are different. Please find further in-
formation in the "Version summary" chapter.
The switching commands sequence must be carried out in quick succession. Any addi-
tional functions that have been set are retained.
Carry out the following deletion sequence without interruption between the individual drive commands:
STOP 1 s until 1 s 1 s 1 s 1 s 1 s 1 s
The tubular drive makes a "click click" sound to confirm.
Both limit positions are deleted.
15