Becker E16-V1, Assembly And Operating Instructions Manual, Page: 14 / 24

Adjusting the limit positions with a rotary switch or a locking button
black
brown
blue
green-yellow
black
brown
blue
green-yellow
Unlocked
Locked
Locking bolt Moving part of the locking system on the front section of the sun protection system
Bolt mechanism
Fixed part of the locking system in the guide track of the sun protection system
Connect the wires of the tubular drive to those of the same colour in the rotary switch or a locking button and switch on the power
supply.
Attention
The tubular drives are designed for short-time operation (for the operating mode, please
see technical data). An inbuilt thermal protection switch prevents overheating of the tubu-
lar drive. During commissioning (long drop distance or long running time), the ther-
moswitch may trigger. The drive will switch off. After a short cooling-down period, the sys-
tem is ready for operation again.
The drive does not achieve its full duty cycle until it has cooled to ambient temperature.
Avoid a situation where the thermal protection switch cuts in repeatedly.
If the tubular drive switches off prematurely while opening, due to an obstruction, the ob-
struction can be cleared by closing the screen and removing the obstruction. The upper
limit position can be set by opening again.
The functions and presettings of the model versions are different. Please find further in-
formation in the "Version summary" chapter.
Firstly, travel to the lower upper position until the tubular drive switches off automatic-
ally.
14