7
Key = password
(this is only needed for WiFi / WLAN con-
nections)
Please note that the central control can
only be linked into a network by means of
WiFi / WLAN if the WPA2 encryption is
switched on at the router.
An automatic DHCP is usually activated in
private networks. If this is not the case,
please ask your network administrator for
the entries required for the fields
9
,
10,
11
and
12
.
To ensure that a different IP address
is not used every time the CentralCon-
trol reboots, a fixed IP address should
be assigned to the CentralControl.
(Select 8 = Manual, and input the in-
formation needed for the fields 9, 10,
11 and 12).
After configuration has been finished,
some of the data can also be seen under
"System information".
13
If you are unable to establish a con-
nection to your WLAN network using the
standard WLAN driver you should test the
alternative WLAN driver. Only available on
the CC51.
14
You confirm your input and close the
menu with the green tick.
Network configuration
Key / password (PSK)
Automatic (DHCP)
Manual
IP address
Net mask
Gateway
Name server
7
8
9
10
11
12
14
WLAN driver version
Modification requires restart
Standard
Alternative
13
Date / time
1
Please press the "Programs and set-
tings" button.
1
16
