Becker active.5s EU, Operating Manual

Page: 79 / 157

79
NAVIGATION MODE >>>
•
Volume
You can select the standard volume for
voice announcements for each start of
the Navigation device, or switch off
voice announcements completely.
•
Interior noise level
With the
Interior noise level
button,
you can adjust the speed-dependent
volume control. To do this, select the
interior volume level suitable for your
vehicle.
With the
Dynamic
setting (selected
models), the interior noise is meas-
ured with the aid of the integrated mi-
crophone, the volume is then
continually adjusted depending on the
noise level.
•
Announce streets
Using the
Announce streets
button
you can switch the announcement of
the names of streets into which you
are to turn on (
) or off ( ).
•
Announce time of arrival
Using the
Announce time of arrival
button you can switch the automatic
announcement of the expected arrival
times on (
) or off ( ).
Setting the Voice
In the
Voice
settings window you can set
the voice that will make the navigation
announcements for the language that
has been set.
>
In the
Voice guidance
settings
window, press the
Voice
button.
The
Voice
settings window appears.
> Select the desired voice.
A short example announcement is given.
> Confirm your selection by pressing
the
button.
Notice:
If the announcements of you navigation
device are too loud at high speed, you
should select a quieter interior noise. If
the announcements are too quiet, you
should select a louder interior noise.
Note:
The
Announce streets
and
Announce
time of arrival
functions are only
supported by speakers with the TTS
function.
Note:
Voices with a (TTS) tag support the text-
to-speech function (e.g. announcing
roads and reading out text messages).