Device Configuration /
Interface Setup
45
BEC 9800VN User Manual
Service Summary:
The overall service information.
Status:
Select to enable or disable the service.
IPv4/IPv6
IP Version:
Choose
IPv4, IPv4/IPv6, IPv6
based on your environment. If you don’t know which one to
choose from, please choose IPv4/IPv6 instead.
ISP Connection Type:
ISP:
Select the encapsulation type your ISP uses.
Dynamic IP:
Select this option if your ISP provides you an IP address automatically.
Static IP:
Select this option to set static IP information. You will need to enter in the Connection
type, IP address, subnet mask, and gateway address, provided to you by your ISP. Each IP
address entered in the fields must be in the appropriate IP form. IP address from by four IP
octets separated by a dot (xx.xx.xx.xx). The Router will not accept the IP address if it is not in
this format.
PPPoE:
Select this option if your ISP requires you to use a PPPoE connection.
Bridge:
Select this mode if you want to use this device as an OSI Layer 2 device like a switch.
802.1q Options
802.1q:
When activated, please enter a VLAN ID.
VLAN ID:
It is a parameter to specify the VLAN which the frame belongs. Enter the VLAN ID
identification, tagged: 4-4095.
Double Tag (Q-in-Q):
Enable to activate the Q-in-Q feature.
Inner VLAN ID:
Specify the inner/ending VLAN ID of the final packet. Enter the VLAN ID identification,
tagged: 4-4095
PPPoE (If selected PPPoE as WAN Connection Type; otherwise, skip this part)
Username:
Enter the user name provided by your ISP.
