BCBA02 Wireless Electronic Bite Alarm System
Bite alarm units
⚫
8 t
o
nes settings
⚫
8 volume settings
⚫
5 sensitivity settings
⚫
15 sec latching LED
⚫
8 magnet rollers
⚫
Running LED (all are white)
⚫
Push button LED dimmer
⚫
Black satin smooth finish
⚫
Colorful light rollers
⚫
150-200 meters
⚫
Operates with the 1.5V * 3 batteries
⚫
2.5mm jack socket
⚫
Memory function in bite alarm
⚫
Toggle switch
⚫
Removable storm ears
Alarms User Instruction
Inserting battery
Undo single battery ------- slide down battery cover ------- insert 1.5V * battery
To complete the procedure, gently push back the battery cover ,
Power on/off switch
Push the switch to right “Power ON”, push the switch back left position “Power OFF”
Volume adjustment
Press the volume control “V”to step through the 8 volume settings , ranging from low to high and silent mode .
Tone adjustment
Press the tone adjustment button “T” to step through the 8 settings .
On/Off Light switch
Press the light control “L” to set ON/OFF night light .
Sensitivity adjustment
Press the sensitivity adjustment button “S” to step the 5 sensitivity settings , ranging from Minimum to Maximum
mode.1 beep equals maximum sensitivity to 5 beeps minimum sensitivity .
Run indication / Low battery indication
When magnet roller wheel is a
ctivated . Both LED’s will be illuminated . The latching LED will illuminate for 20
seconds and the run LED illumination stops when the roller wheel finishes rotating ./ Run LED on bite alarm will
flash /blink once every 5 seconds when battery low .
Technical Specification
Transmitter :
Power Voltage : 1.5 V * 3
Standby Current : 6uA
Working current : 58mA
Shut down current : 0mA
Working Power : 9dB
Frequency : 433MHz
Coverage range : 150~200m
Working Temperature :-10 ~70
℃
Receiver :
Power voltage : 1.5V *3
Standby Current : 2.6mA
Working current : 21mA
Shut Down Current : 0mA
Receiving Sensitivity : -95db
Frequency : 433MHz
Coverage Range : 150~200m
Working Temperature :-10 ~70
℃
