Remote Unit Installation
Ch. 2 Preparation
Service Utilities
Equipment and Material
1106333-01
Pre-Production
17
Revision 3
Equipment and Material
The BRU-150 is a subscriber self-install unit and does not require any
additional equipment or materials. If a service call is needed to resolve
installation problems or reception problems, the following equipment may
be needed depending on the specific situation:
•
A compass for determining the bearing to a base station from the
subscriber’s location. The compass should have a bearing ring, which is
a ring around the face with graduation marks in degrees.
•
A GPS receiver to determine the coordinates of the subscriber’s
locations. Alternative methods are discussed in the section
