BeamMed Sunlight Omnisense 7000S, User Manual

Page: 176 / 284

10-2
User Guide
CHAPTER 10
System Administration
Figure 10.1 User List dialog box
Add users by clicking on the
Add
button; at left to add a physi-
cian, at right to add an operator. The System Administrator and
physicians can add both types of users; operators can add only
operators.
Clicking on
Add
causes the dialog box shown below to be dis-
played.
Figure 10.2 Add user dialog box
User IDs must be unique. If the ID entered is the same as one
which already exists in the system, Omnisense will refuse to
accept it, as illustrated in Figure 10.3.
Administration>List of Users
For users whose
level does not permit
them certain func-
tions, e.g. “Add” or
“Associate”, these
buttons are not
active.
Current user ID and
level shown here.
For the System
Administrator only,
Current user is set to
“Sunlight.”
OK or Cancel