manualshive.com logo in svg

BEAMEX MC6-T, Manual, Page: 98 / 172

Share
Download
BEAMEX MC6-T Manual Download Page 98

98 - Documenting Calibrator

Figure 91: Calibration results history window

Note: 

 Saved calibration results cannot be edited.

Deleting Calibration Results

When viewing the results of a calibration, you may delete the currently

viewed result (menu option 

Delete This Result

) or remove all results

related to current instrument (menu option 

Delete All Results

).

You may also remove all results related to current instrument in 

Results

History

 window: Select menu option 

Delete All Results

.

Warning: 

 Once the results are deleted, there is no way to

retrieve them.

Get mapped value feature

With the “Get mapped value” feature you can automatically read certain

data from connected smart transmitter to the MC6-T instrument data. This

automates process of creation of a new instrument to the MC6-T.
This is very useful especially with the long data fields, as they don't need

to be added manually add to the MC6-T.

Summary of Contents for MC6-T













































































































































































Reviews:

No comments