BEAMEX MC6-T Manual Download Page 7

Page: 7 / 172

- 7

Prologue

Thank you for buying Multifunction Temperature Calibrator and

Communicator.
Beamex MC6-T is an advanced, high-accuracy field calibrator and

communicator. It offers calibration capabilities for temperature, various

electrical signals as well as pressure. MC6-T also contains a fieldbus

communicator for HART, FOUNDATION Fieldbus and Profibus PA

instruments.
MC6-T consists of two main parts: Temperature Block and Process

Calibrator. MC6-T is equipped with an internal battery, therefore the

Process Calibrator functions can be used without mains voltage.
There are two different models available for MC6-T:
• MC6-T150 that can generate temperatures between -30..150 °C, at

ambient temperature of 23 °C.

• MC6-T660 that can generate temperatures between 50..660 °C.

This manual is valid for both models.

MC6-T's main features are multifunctionality and ease-of-use. MC6-T is

one device with five different operational modes: Temperature Calibrator,

Calibrator, Documenting Calibrator, Data Logger and Communicator.

In addition, MC6-T communicates with Beamex CMX and LOGiCAL

calibration softwares, enabling fully automated and paperless calibration

and documentation. MC6-T can also communicate with external

temperature and pressure controllers/generators.

Summary of Contents for MC6-T













































































































































































Search results

Summary of Contents for MC6-T

Reviews:

BEAMEX MC6-T, Manual, Page: 7 / 172

Search results

Summary of Contents for MC6-T

Reviews: