manualshive.com logo in svg

BEAMEX MC6-T, Manual, Page: 59 / 172

Share
Download
BEAMEX MC6-T Manual Download Page 59

- 59

Tools

MC6-T

 has 

Tools

 buttons in the lower left corner of certain subwindows.

The lists in the following subchapters present available tools. Certain

tools are available for measurements only and others for generations/

simulations only.

Figure 47: Tools button

Note: 

 The available tools also depend on the selected Quantity

and Function, e.g. Switches have limited amount of tools.
Several tools have a "

Stop

" button in the pop-up window the

Tool is configured in. To stop, e.g. Damping, open the Damping

configuration window and tap the 

"Stop"

 button. Then MC6-T

reverts to default damping settings.
Changing the Quantity of a subwindow reverts all Tools, except

Additional Info settings, to their default settings for that particular

Quantity.
In 

Calibrator 

window: the additional info fields with black text

may be zeroed "on the fly". Zeroing options are available in

Additional

 

Info

 window's menu.

Summary of Contents for MC6-T













































































































































































Reviews:

No comments