manualshive.com logo in svg

BEAMEX MC6-T, Manual, Page: 113 / 172

Share
Download
BEAMEX MC6-T Manual Download Page 113

Doing a Data Log - 113

Figure 109: Data Log Result list

Each saved Data Log result has the time/date it was saved and the

entered result name on the first row in bold font. On the second row you

can see information of Data Log's size and possibly the name of the

configuration used for doing the Data Log.

Note: 

 When viewing the list of saved Data Log results, the

menu includes the possibility to 

Delete All

 saved Data Log

results. If you select one of the existing results for viewing, the

menu includes a possibility to either 

Delete

 or 

Rename

 the

viewed Data Log results.

Transferring Data Log Results to a Personal
Computer

Beamex MC6 Data Log Viewer

 (executable file:

"MC6DataLogViewer.exe") reads data log results to a Personal Computer.

The software works in any 32 bit or 64 bit Windows system, starting from
Windows

®

 8. Installation software for 

Beamex MC6 Data Log Viewer

 is

downloadable from Beamex's web site 

https://www.beamex.com

. Look

for 

Download Center

.

Summary of Contents for MC6-T













































































































































































Reviews:

No comments