BEAMEX MC6-T, Manual, Page: 111 / 172

Doing a Data Log - 111
Figure 107: Graph view during Data Log
Note: If, in general settings, the Logging Method is " Key
Press ", none of possible triggers defined for individual channels
are valid. The snap shot is saved immediately each time the
snap shot button ( ) is tapped on.
A generation/simulation value may be changed during the data
log as follows:
In the main configuration window, tap on the channel where
a generation/simulation is configured. In the opened window,
locate the output value field and tap on it to edit the numeric
value.
Viewing and Saving or Deleting the Results
When Data Logging is finished, or stopped, the results are shown on
three pages: general information page, graph page and a table of numeric
results. If the table of numeric results is large, use the scroll buttons or the
scroll bar to see hidden rows/columns.