Page 1 of 2
75.5029 V1 Oct 2005
PRODUCT
DESCRIPTION
COMPONENT ID
SAFETY
PRECAUTIONS
TECHNICAL
SPECIFICATION
The 4-channel radio control transmitter (PN: 10T300HH4) allows independent activation of 4 different radio
control receivers. The transmitter operates on a 9-volt battery, and at a frequency of 300MHz. All receivers
within the operating system must be of the same 300MHz frequency. Transmitter codes are set by a 10-
position dipswitch.
DESCRIPTION
SPECIFICATION
Input Voltage
9 Volt Battery
Operating Frequency
300 MHz
Dimensions (with case)
3 11/16” x 2 3/8” x
¾
”
Code Change Ability
10 Position Dipswitch
Compliance(s)
FCC ID EF4 NE 02X4 – Part 15
•
Shut off all power going to the header before attempting any wiring procedures.
•
Maintain a clean & safe environment when working in public areas.
•
Constantly be aware of pedestrian traffic around the door area.
•
Always stop pedestrian traffic through the doorway when performing tests that may result in unexpected
reactions by the door.
•
Always check placement of all wiring before powering up to insure that moving door parts will not catch
any wires and cause damage to equipment.
•
Ensure compliance with all applicable safety standards (i.e. ANSI A156.10) upon completion of
installation.
USERS GUIDE
4 – CHANNEL TRANSMITTER
