Seite
22
von
27
5.
ADJUST HUMIDITY
Set the desired humidity level. Each time the button is pressed, the humidity increases
by 5% from 40% to a maximum of 80%.
As soon as the desired humidity is reached. Once the desired humidity level is reached,
the device stops working and enters the Standby Mode. If the humidity level is 5%RH
lower than the desired humidity level, the device will automatically start working again
to keep the target humidity level.
When desired humidity level is set and start working, it will keep humidifying for 2
minutes no matter the room humidity reach the desired humidity or not. After 2 minuts,
it will stop if the humidity level is higher than the desired level.
6.
ION-MODE
The humidifier is equipped with a negative ionizer. This distributes ionized air into the
rooms and removes static charges.
To start the ionizer function, press the ION button
the button
lights up.
To stop the function, press the ION button again.
7.
UV-MODE
The humidifier is also equipped with a UV function, this cleans the air and frees it from
bacteria, germs and viruses. The emerging mist is thus disinfected.
To start the UV function, press the UV button for around three seconds
the button
lights up.
To stop the function, press the UV button for around three seconds.
8.
NIGHT-MODE
When the humidifier is switched to night mode, the display switches off and the device
continues to run in the mode you have set. To switch the night mode on press the
NIGHT MODE button.
Press any button to turn off.
9.
AUTO-MODE
This product maintains the relative humidity at 55%~68%. The humidifier will choose
the best humidifying method according to different room ambient humidity.
To activate the auto mode, press and hold the AUTO button for approx. 3 seconds
the button
lights up.
To stop the function, press the AUTO button again.
