BDV CXPS, User Manual

Page: 109 / 128

. . . . .
R S - 2 3 2 A N D 1 0 / 1 0 0 T P R O T O C O L
CXPS Command Set
CXPS Manual Edition 1.07 Reference
103
MSW MSW <input #> <output
#>...<output #>
Special command. Switches the input to multiple
outputs.
NOTE: For firmware version 4.80 and above.
OUTBRI OUTBRI <output #> <+/1 100>
Adjusts the brightness of the output.
OUTCONT OUTCONT <output #> <0-200> Adjusts the contrast of the output.
OUTPUTLIST OUTLIST
Lists the output custom host timing table.
OUTPUTLISTDEL OUTLISTDEL <slot #> Deletes the output custom host timing at the
specified slot.
OUTPUTSTATUS OSTAT <output #>
Returns the input number connected to the output.
OUTPUTSTATUSALL OSTATALL
Returns all of the input/output switching
assignments.
OUTT OUTT <output #>
Displays the output timing of the selected output
channel.
PROFILEDELETE PD <profile #> Deletes the chosen profile.
PROFILERECALL PR <profile #>
Sets up the input/output configuration from a
stored profile.
PROFILESAVE PS <profile #>
Saves the current input/output configuration as a
profile, with up to 10 profiles possible.
<profile #> can be any number 1-10.
SATURATION SAT <input #> <sat>
Adjusts the saturation of the input signal. SD
inputs only.
<sat> is a value from 0 to 200.
SETINPUTTIMING SETIT <input #> <host>
Assigns a default host timing to the input. The
Vtotal, Hperiod, and interlace mode of the host
must match the input source.
<host> is a number which refers to the built in
host table.
Use the command
HOSTLIST
to display the host
table
SETOUTPUTTIMING SETOT <output #> <host> Assigns a default host timing to the output.
<host>
is a number which refers to the built in
host table.
To display the host table, use the HOSTLIST
command.
SSO SSO <preset#> <input>
<output> <input> <output>
...... <input> <output>
Simultaneous Switching Outputs command allows
user to store switching pairs in 32 different slots.
The maximum number of I/O pairs is eighteen.
SSODEL SSODEL <preset#> To delete the SSO setup.
SSORUN SSORUN <preset#>
To simultaneously switch outputs using the preset
input-output pairs.
SWITCHING COMMANDS
Command Syntax Action
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .