BDI vertica Assembly Instructions Manual Download Page 1

1

 

Vertica is engineered for easy assembly. Carefully 

follow this procedure to prevent any damage.

Placement and Maintenance

Vertica is designed for indoor use on level floors. 

Clean wood veneer with a moist cloth.

Step 1 

Unpack and Identify

Unpack and identify the components at left. Note 

that some components are shipped inside the 

cabinet. The assembly workspace should be a non-

marring surface such as carpet. For missing hardware pieces, please 

contact BDI Customer Service at [email protected]. For all 

other concerns, please contact your BDI Retailer.

Component List 

Designed by Matthew Weatherly.

These distinctive product configurations are protected by US and international patents, 

trade dress, and/or copyright laws. 

BDI are trademarks of Becker Designed, Inc. 

All Rights reserved.  ©2014, BDI 

Made in China. 8556REV100815v3

Step 2

Install and tighten

 Cam Bolts (D)

 into 

Side Legs (G

) using 

Phillips 

Screwdriver (A

). Insert 

Wood Dowels (F)

 into corresponding holes of 

Side Legs (G)

B2 - 

Leveler  Wrench       

                x  1 

A - 

Phillips Screwdriver

       x 1

B1 - 

Hex Wrench  

         x 1 

C - 

Cabinet x 1

F - 

Wood Dowel x 2

E - 

Cam Fitting x 2

D - 

Cam Bolt x 2

H - 

Base Stretcher 

      x 1

I - 

Center Leg x 1

G - 

Side Legs x 2

L - 

Adjustable Shelf 

 

x 1    

M - 

Back Panel 

      x 1   

K - 

1/4-20 x 100 mm   

      Machine Screw  

      x 6

J - 

1/4-20 x 60 mm   

      Machine Screw  

      x 3

F

D

G

F

F

D

D

G

G

vertica

8556

home theater

a s s e m b l y   i n s t r u c t i o n s

bdi

usa.com     [email protected]

TWO PERSON ASSEMBLY

Summary of Contents for vertica








Reviews: