manualshive.com logo in svg

BDI COSMO CONSOLE 5729, Assembly Instructions Manual

Share
Download
BDI COSMO CONSOLE 5729 Assembly Instructions Manual Download Page 1

1

Product Registration

Registering your new BDI product allows us to send you important 

product updates, service information and helpful hints related to your 

BDI products. Register today, and you will be entered to win free a 

BINK table from BDI: www.bdiusa.com/register 

Placement and Maintenance

Your Cosmo Console is designed for indoor use on level floors. 

Clean wood, metal, and porcelain surfaces with a damp cloth. 

Cosmo is engineered for easy assembly. Carefully follow this 

procedure to prevent any damage. Do not use power tools for 

assembly of this product.

Step 1 

Unpack and identify the parts listed below. The assembly workspace 

should be a non-marring surface such as carpet. For missing 

hardware pieces, contact BDI Customer Service at: 

[email protected]. 

For all other concerns, please contact your BDI retailer. 

bdiusa.com

[email protected]

Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and international patents, trade dress, 
and/or copyright laws. Cosmo & BDI are trademarks of Becker Designed, Inc. All rights reserved. 
©2019, BDI  Made in China.  07.15.2019

COSMO

™

 

5729

CONSOLE

Tool Required:

Phillips Driver    x 1            

Tool Provided:

T1  

Hex Driver    x 1

 

A1  

Cabinet x 1

  

 

 

C5 

Drawer liner x 2    

C2 

Front Base Frame x 1

C3 

Connector Tube x 3

C1 

Back Base Frame x 1

H1 

M6 x 12mm  

Screw x 10

H2 

M6 x 35mm  

Screw x 2

Summary of Contents for COSMO CONSOLE 5729








Reviews:

No comments

Brands by name

Popular brands

Load more brands