Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Centro & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2017, BDI
Made in Taiwan. 10.10.2018 v5 New Controller
T2
4mm Hex Wrench
C7
Wire Tray x 1
C4
Keypad x 1
C5
Power Cord x 1
C3
Control Module x 1
C8
Glass Panel x 1
A1
Main Panel x 1
C1
Leg x 2
C6
Cord Conduit x 1
C2
Foot x 2
bdiusa.com
CENTRO
™
6451/6452
LIFT DESK
H5
1/4-20 x 12mm Screw x 7
Tool Required:
Phillips Screwdriver
H2
#6 Wood Screw x 6
H3
M6 x 12mm Screw x 8
H8
Glass
Bumper x 2
C9
Grommet Cover x 1
H9
Dual Lock Dot x 8
Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your BDI
products. Register today, and you will be entered to win free a BINK table
from BDI: www.bdiusa.com/register
Placement and Maintenance
Centro Lift Desk is designed for indoor use on level floors. Clean glass
with glass cleaner, and steel parts and wood veneer with a moist cloth.
Your Centro Office furniture is engineered for easy assembly. Carefully
follow this procedure to prevent any damage. Do not use power tools
for assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly workspace
should be a non-marring surface such as carpet. For missing hardware,
please contact BDI Customer Service at [email protected].
For all other concerns, please contact your BDI retailer.
H7
Leveler x 4
H6
Cord Clip x 6
H1
#10 Wood Screw x 4
T1
5mm Hex Wrench
H4
M6 x 16mm Screw x 8
OWNER’S MANUAL
