Avion
TM
8540-1
Assembly Instructions
HIGH PERFORMANCEFURNITURE FOR YOUR
HOME THEATER
Page 1: ...AvionTM 8540 1 Assembly Instructions HIGH PERFORMANCE FURNITURE FOR YOUR HOME THEATER ...
Page 2: ...ote If back of TV has a curved surface or if bars do not rest flat use spacers and long mounting screws provided Make sure bars are centered left to right Fully tighten bars to TV Flat Screen TV back view Short Mounting Screw Washer Universal Mounting Bar Flanged Nut x 4 Spacers x 8 Large Small Avion Home Theater Furniture Your Avion Home Theater Furniture is engineered for easy assembly Carefully...
Page 3: ...e right Note You may raise or lower the position of the horizontal mounting brackets depending on the desired television height Install both support tubes B1 and B2 through the holes on the top panel of the Avion cabinet and fasten them from the underside of the cabinet using the A 1 1 2 button head screws as shown B1 B2 Note Lower opening face towards center of unit C1 C2 ...
Page 4: ... bars to horizontal mounting brackets at desired height by inserting the threaded studs into key holes Note Flanged nuts are provided in the Plasma Mounting Blister Pack and must be threaded on the studs of the upper mounting bar in order to prevent any damage to the TV Install the second set of flanged nuts to the threaded posts of the lower mounting bar Once positioned fully tighten all flanged ...
