BD FACSCanto II, Reference Manual, Page: 86 / 158

86 BD FACSCanto II Flow Cytometer Reference Manual
2
If it is off, turn on the cytometer main power.
Reconnecting the Ethernet and RS232 Cables
The cytometer connects to and communicates with the workstation through
Ethernet and RS232 network cables. If these cables should become disconnected,
use the following diagram to reconnect them.
Both cables connect to ports on the PC workstation. As the make and model of
the workstation might vary, refer to the documentation that came with your
system for information.
Reconnecting the Fluidics Cart Tubing
Should any plugs, cords, or tubings become accidentally disconnected, use the
following diagrams to reconnect the fluidics cart to the cytometer (Figure 4-6 on
page 87).
!
Tip The ports and connectors are color coded.
RS232 cable
Ethernet cable