BD FACSCanto II, Reference Manual, Page: 29 / 158

Chapter 1: Introduction 29
Powering Off
To turn off the fluidics cart (and the cytometer, as well), press the system power
button. Normally during cart shutdown, you hear a hiss, and a small amount of
condensed water will discharge.
Condensation Trap
The fluidics cart condensation trap is located beneath the controls panel (see
Figure 1-7 on page 26). Empty the trap during the daily startup procedure.
Computer Workstation
The workstation consists of a computer compatible with Microsoft Windows XP
Professional operating system, a flat-screen monitor, and an optional printer.
BD FACS Loader (Optional)
The BD FACS Loader automatically introduces prepared samples to the
cytometer. The Loader is controlled by BD FACSCanto clinical software or
BD FACSDiva software. It can be added to your system at any time. The Loader
consists of:
• a drawer
• sliding doors
• optical sensors
• an electronics module
• a tube lifter
• a 40-tube carousel
• tube guide (with sensor)