Chapter 6: Sample processing
71
Searching for test
results
To search for test results:
1. Press
Up
or
Down
to scroll through the test results.
Filtering test
results
You can filter test results by patient ID, date, or both. To filter test
results by both patient ID and date, perform both of the following
procedures.
To filter test results by patient ID:
1. Press the
Patient ID
field.
2. Enter the patient’s ID.
If you do not know the exact patient ID, use an asterisk (*).
For example, if you are searching for a patient ID that begins
with 123, enter: 123*. If you are searching for a patient ID
that ends with 123, enter: *123. If you are searching for a
patient ID that contains 123, enter: *123*.
3. Press
Accept
.
If you are also filtering by date, perform the following
procedure.
To filter test results by date:
If you are filtering by date only, the Patient ID field should contain
the default value of an asterisk (*) only.
1. Press the
Start Date
field.
2. Press
Up
or
Down
to select the start date for the filter.
3. Press
Accept
.
4. Press the
End Date
field.
5. Press
Up
or
Down
to select the end date for the filter.
6. Press
Accept
.
Printing test results
You can print only one test result at a time.
