Chapter 3: Instrument setup
25
Power connection
using a wall
electrical outlet
The following figure shows the power connection using a wall
electrical outlet.
Power connection
using a car battery
charge adapter
To connect power to the instrument using a car battery charge
adapter:
1. Plug the car battery charge adapter directly into the car’s
cigarette lighter receptacle.
Do not plug any adapters or splitters into the cigarette lighter
receptacle.
2. Make sure the LED light on the car battery charge adapter
lights up. You might need to turn the car’s ignition switch to
the On position or turn the engine on.
No.
Component
1
Power supply
2
Adapter cord
1
2
