background image

 

 

SYMBOLS OF THE MANUAL 

 

CAUTION your safety is involved and special 

precautions must  be  taken to avoid damage 
to the shock absorber. 

 

 

IMPORTANT 

the 

following 

information is important regarding 
procedures.  Failure  to  follow  the 

warning instructions can result in sever damages. 

 

 

 

 

GENERAL WARNINGS 

The shock absorber is an important part of your bicycle. 
Make  sure  you  read  and  understand  the  following 
warnings and any other technical documents provided 
by Bos before using the product.  

Install  the  shock  onto  your  bicycle  frame  using  the 
appropriate  hardware.  Before  riding,  inspect  the 
exterior of your product it should not be used if any of 
the exterior parts appear to be damaged.  

Contact  us  or  your  local  Bos  Suspension  retailer  for 
further inspection, maintenance or repair. This manual 
should  be  considered  as  a  part  of  the  product  and 
should be kept throughout its lifetime. 

 

Bos Suspension’s limited warranty  

Bos Suspension warrants to the original owner that the Bos Suspension product when new, is free from defects in material and 
workmanship. This limited warranty expires one year from the date of the original retail purchase. A copy of the original proof of 
purchase will be required for any warranty claim.  

This limited warranty is only applicable to Bos Suspension purchased new from an authorized Bos Suspension source. The limited 
warranty is made only to the original customer and is not transferable to subsequent owners.  

Wear and tear parts such as dust seals, O-ring, bushings, rear shock mounting hardware, shafts, threaded parts and bolts are not 
covered by this warranty. 

TERMS 

This limited warranty is subject to legal jurisdiction or warranty rights of the original purchase country which will prevail if di

ff

erent 

from the terms herein listed. 

 

LIMITS 

 

This  limited  warranty  is  conditioned  on  the  Bos  Suspension  product  being  operated  under  normal  conditions  and  properly 
maintained as specified by Bos. The liability of Bos Suspension will not be implied for any and all other damages, including but not 
limited to, incidental, consequential or punitive damages.  

 

EXCLUSIONS  

This warranty doesn’t cover :   

-

 

Damages resulting from improper assembly  

-

 

Damages resulting from an accident, crash or collision under any circumstances  

-

 

Malfunctions that results from abuse  

-

 

Modification, alteration, improper or unauthorized repair by the owner or a third party  

-

 

Improper or excessive use.  

-

 

Violation of the maintenance procedures and/or the time allowance between service.  

-

 

Replacement of the original parts  

-

 

Warranty is void is the serial number is removed or altered.  

 

PROCEDURE  

When making a claim under this limited warranty to the Bos Warranty Department you’ll be required to provide a copy of the 
original proof of purchase otherwise the claim will not be considered. Please contact the Bos Suspension Warranty Department 
before returning a product that may be covered by this limited warranty. If the warranty doesn’t apply the packaging and shipping 
costs will be charged to the customer.  

WARRANTY 

 

SAFETY INSTRUCTIONS 

 

Summary of Contents for SYORS













Reviews: