BCDVideo BCD221, User Manual

Page: 86 / 157

• Disconnect each power cord from the power source.
• Disconnect each power cord from the server.
3. Do one of the following:
• Extend the server from the rack .
• Remove the server from the rack .
4. Remove the access panel .
5. Remove the riser cage .
6. Install the riser.
7. Install any expansion cards, if needed .
8. Connect any data cables to riser or expansion boards.
9. Install the tertiary riser cage .
10. Connect cables to drive backplanes, if needed.
The installation is complete.
Installing a secondary riser cage
Prerequisites
Before installing this option, be sure that you have the following:
• The components included with the hardware option kit
• T-10 Torx screwdriver
Procedure
1. Observe the following alert:
CAUTION:
To prevent damage to the server or expansion boards, power down the server and remove all AC
power cords before removing or installing the PCI riser cage.
2.
Power down the server .
3.
Remove all power:
a.
Disconnect each power cord from the power
source.
b.
Disconnect each power cord from the server.
4.
Do one of the following:
86 Installing a secondary riser cage