background image

GSC3219TA 
Owner’s Manual 

 

1

 
 

Grill Operation 1-2-3 

 

Before Grilling 
 

Step 1      Keep your grill a safe distance away from your property. 
Step 2      Always perform a leak test on all connections and hoses.   
Step 3      Keep children away from the grill. 
 

During Grilling 

(To avoid tripping safety valves, please follow these instructions carefully!) 
 
Step 1      First open lid and turn gas tank on slowly. 
Step 2      Turn only one knob on at a time when lighting up the grill. 
Step 3      Use protective gloves when grill gets hot. 
Step 4      Never leave a lit grill unattended. 
 

After Grilling 

 
Step 1      Always burn grill for 10-15 minutes to burn off food residues after use. 
Step 2      Wait until the grill is completely cooled before closing lid. 
Step 3      Clean up grease build-up to avoid grease fire and cover your grill to prevent rust. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

 

Always read and understand the 

WARNINGS

 and 

INSTRUCTIONS

 that are contained in this manual before attempting to use 

this gas barbecue grill to prevent possible bodily injury or property damage. 
 

NOTE: 

This grill must be used with propane gas only (propane gas cylinder not included). 

Installer

: Leave this manual with the consumer. 

Consumer

: Retain this manual for future reference. 

 

 

 

 

 

 

WARNING:

 

1. Do not store or use gasoline or other 

flammable liquids or vapor in the vicinity of 
this or any other appliance.       

 

2. An LP cylinder not connected for use shall not 

be stored in the vicinity of this or any other 
appliance. 

 

DANGER:

 

If you smell gas: 

1.    Shut off gas to the appliance. 
2.  Extinguish any open flame. 
3.  Open lid. 
4.  If odor continues, keep away from the 

appliance and immediately call your gas 
supplier or your fire department.       

Summary of Contents for GSC3219TA

























Reviews: