19
TRANSPORTATION AND STORAGE
1.
Always use the Safety Cap when transporting or storing your cylinder.
2.
Do not store in a building, garage, or other enclosed area.
3.
Always store your cylinder outside.
4.
Store out of reach of children.
5.
Always transport in an upright position.
6.
Do not smoke when transporting your cylinder.
Regulator and LP Cylinder Connections
Your regulator is equipped with a Q.C.C. Type 1 quick connect system. It will not allow gas to flow until a
positive seal has been made. It has a thermal element that will shut off the gas flow if the temperature reaches
240 degrees F (115 degrees C). It also has a flow- limiting device that will restrict the flow of gas to 10 cubic
feet per hour (0.28 cubic meters per hour).
TO CONNECT THE CYLINDER TO THE REGULATOR AND HOSE
1.
Be sure the LP cylinder is “OFF” by tur ning the hand wheel clockwise
until it stops.
2.
Place the cylinder into the base cabinet shelf of the grill with the valve
facing outward. See Assembly Instructions to secure.
3.
Be sure all burner controls are turned to the “Off” position.
4.
Remove the safety cap from the from the cylinder valve.
5.
Center the nipple of the regulator into the cylinder valve
6.
Turn the black nut clockwise until it stops.
Hand Tighten Only.
Do Not Use A Wrench.
! CAUTION !
The gas pressure regulator provided with
this outdoor cooking appliance must be
used. This regulator is set for an outlet
pressure of 11 inches water column.
! MISE EN GARD !
Le régulateur de pression de gaz prévu avec cet
appareil de cuisson a gaz pour l’extérieur doit
être utilise. Ce régulateur est règle pour une
pression de sortie de 11 pouces de colonne
d’eau.
DANGER
Bubbles indicate a leak. In that case, call your LP dealer or fire department immediately.
Safety Cap
