ENGLISH (US)
Page 18 of 28
OTH-SEM250-0356 Rev D
9.
LDAP Server Set-Up and Connection
The following steps shall be performed on the LDAP server
9.1.
Identify IP Address and Port
Identify the IP address of and the Inbound port associated with the LDAP server for later use.
1.
Identify two LDAP Server roles as follows:
a.
Users with access to BBI Administrator functionality
b.
Users with access to BBI Client functionality
2.
If these roles already exist, disregard the optional steps below.
9.2.
Optional – Create BBI LDAP Server Roles
1.
Login to the LDAP Server as an administrator
2.
Launch the Windows
®
tool, “Active Directory Users and Computers”.
3.
Identify and navigate to the desired forest to contain the new BBI LDAP server roles
(e.g.: cpx.local).
4.
Right-click the “Users” folder and select “New” and then “Group”.
5.
Enter “BRUINADMIN” as the Group Name:
a.
Make sure “Global” is set for the Group Scope and “Security” is selected for the
Group Type
6.
Select “OK” to save and continue.
7.
Right-click the “Users’ folder and select “New” and then “Group”.
8.
Enter “BRUINCLINICAL” as the Group Name:
b.
Make sure “Global” is set for the Group Scope and “Security” is selected for the
Group Type
9.
Select “OK” to save and continue.
9.3.
Assigning Roles
There are two roles in the Gateway:
BRUINADMIN (“Admin”) – for administration of the server
BRUINCLINICAL (“Clinical”) – for clinical access and data viewing
Assign at least one hospital user to each role.
