BBH SCU Series Programming Manual Download Page 66

Page: 66 / 252

Programming manual SCU-series

HB-37500-820-10-12F-EN SCU Programming manual

Page 66 of 252

Status: 19.03.2021

4.3.20.1. Tab

“

User

s”

In the tab “

User

s”

the adminstrator can change the rights for the other users.

Figure 41

Tab “User“ in the window “UserRights“.

1. List of users with the name of the user group to which they belong (e. g.

administrator). If the default user rights are not cancelled, every user has default
rights he or she assumes from the user group.

2. List of elements and of rights of the current selected user.

NOTICE:

You can change the rights for every block or every group separately by clicking the right

mouse button on the

block or on the group and selecting “Berechtigung ändern“ [Change Right].

4.3.20.2.

Tab “Gruppen“

[Groups]

With the tab “

Groups

“ the adminstrator can change the standard rights of individual user groups.

Figure 42

Tab “Groups“ in the window „User Rights Dialog“.

Summary of Contents for SCU Series





























































































































































































































































Search results

Summary of Contents for SCU Series

Reviews:

Related manuals for SCU Series

Brands by name

Popular brands

BBH SCU Series, Programming Manual

Search results

Summary of Contents for SCU Series

Reviews:

Related manuals for SCU Series

Brands by name

Popular brands