![background image](http://html1.mh-extra.com/html/bayrol/naturally-salt-salt-relax-power/naturally-salt-salt-relax-power_operating-and-installation-manual_2713062019.webp)
4 Operating the Salt Relax POWER
19
4.4.3
Network
Setting the network connection when using the optional WIFI module.
Make these settings once you have installed the WIFI module and connected it to your Salt Relax POWER.
To set, use
/
to select the network and confirm using
.
WIFI
Selecting this option using
starts the scan process for the connected WIFI module. The detected WIFI
networks are then displayed.
Networks
Select the required network using
/
and confirm using
.
The keyboard is then displayed and you can enter the code word for the
selected network.
System settings
The configuration settings are entered automatically by the system. Please consult an IT expert if you are
shown an error message.
Status
The status of the WIFI connection is displayed here.
Test connection
The WIFI connection can be tested here.
The WIFI module is connected to the Internet as soon as both LEDs on the module are lighting.
4.4.4
Screen
Setting the screen brightness and switch-off time.
To set, select Screen with
/
and confirm with
Intensity
To change the brightness of the display, select the desired value with
and
.
Sleep (screensaver
)
Using
and
, select the time after which the display switches off if no
key is pressed.