![background image](http://html1.mh-extra.com/html/bayrol/naturally-salt-salt-relax-power/naturally-salt-salt-relax-power_operating-and-installation-manual_2713062011.webp)
4 Operating the Salt Relax POWER
11
4.3
The main menu
4.3.1
Filtration
The Filtration menu allows you to set the activation of the filter pump. In addition, depending on the menu item,
control of the heating can also be included.
The line Filtration shows the selected operating mode (man, aut, hea, smt, int) and the current operating state of
the filtration pump (on/off).
To set, select Filtration using
/
and confirm with
. The mode is selected in the line Mode
using the
/
keys
Manual mode
Allows you to switch the filtration process on and off manually, without timer or additional functions.
Displays whether the filtration pump is switched on. Switch using the keys
/
Sets the speed of the circulating pump (only when using a circulating pump with variable speed control).
see below
Automatic mode (time-controlled)
In this mode, filtration can be activated via timers allowing you to enter starting and stopping times. The
timers run on a daily schedule.
Setting the daily switch-on and switch-off times (up to 3 filtration cycles possible).
To set, use
/
to select the line for the timer you wish to set (1-3).
Press the
/
keys to access the hour for starting the selected timer. Set the hour at which the timer is
to start using
/
. Press
to enter the minutes of the starting time and set using
/
. Confirm
your entry with
or reject it with
.
Set the switch-off time for the selected timer in the same way.
Sets the speed of the circulating pump in the respective filter periods (only when using a circulating pump
with variable speed control).
Press the
or
keys to access and also change the setting. Use
or
to switch between 1, 2 and
3. Confirm your entry with
.
The speed of the pump is set to slow with S, medium with M and fast with F.
see below
BILD
Filtration
Heating mode