OPERATION
12
Step 1:
The Conveyor Control uses high level and low level
sensors (located on the hopper above the inlet) to initiate the
inlet feed conveyor. Each sensor is equipped with a light,
that when turned on indicates the sensor is working but
the bin is empty. The light will turn off once the sensor sees
material in the bin and activates the control.
Step 2:
If the red Emergency Stop (E-STOP) button is
pushed (depressed), both conveyors will automatically stop
running. To activate the conveyors, turn the E-STOP button
clockwise and pull slightly. Both conveyors will resume
running.
Continued