background image

EN

EN-12

Single Electric 2-Phase Breast Pump

EN

13

This symbol indicates that a fee has been paid to an organisation performing recollection and utilisation 
of the packaging waste .

This symbol indicates the material from which the packaging is made .

This symbol on products or original documents means that used electric or electronic products must 
not be added to ordinary municipal waste . For proper disposal, renewal and recycling hand over these 
appliances to determined collection points . Alternatively, in some European Union states or other 
European countries you may return your appliances to the local retailer when buying an equivalent 
new appliance . Correct disposal of this product helps save valuable natural resources and prevents 
potential negative effects on the environment and human health, which could result from improper 
waste disposal . Ask your local authorities or collection facility for more details . In accordance with 
national regulations penalties may be imposed for the incorrect disposal of this type of waste .

For business entities in European Union states

If you want to dispose of electric or electronic appliances, ask your retailer or supplier for the necessary 
information .

Disposal in other countries outside the European Union.

This symbol is valid in the European Union . If you wish to dispose of this product, request the necessary 
information about the correct disposal method from the local council or from your retailer .

Disposal of used batteries

Batteries contain environmentally damaging compounds and therefore do not belong in standard 
household waste . Take the batteries to an appropriate collection point, which will take care of their 
ecological disposal . You can obtain the contact for the nearest collection point from you town council 
or from your retailer .

Instructions and information about the handling of used 
packaging

Dispose of used packaging material at a site designated for waste in your municipality .

Changes to text and technical parameters are reserved .

Summary of Contents for BBP 1010














Reviews: