Bay Networks Remote Annex 4000, Hardware Installation Manual

Page: 58 / 162

Remote Annex 4000 Hardware Installation Guide
Chapter 2 Installing the Remote Annex 4000
2-20
This section contains the following subsections:
❑
Installing to and Loading from a Novell Server.
❑
Installing to and Loading from a UNIX Host.
❑
Installing to and Loading from a VAX VMS Host.
Installing to and Loading from a Novell Server
This section contains a description of what you need to do to install
the Remote Annex 4000’s operational software and image to a Novell
Server. Proceed as follows:
1 Log into your Novell server as SUPERVISOR or equivalent.
2 Insert the Network Administrator Program Install Disk into your PC’s
floppy drive.
3 Change to your PC’s floppy drive (usually drive A or B).
4 Display or print the README.TXT file for updated information about
the current version of Annex Manager for DOS software.
5 Type INSTALL and press .
A list of your PC’s available drives appears.
6 Select a network drive that is accessible to all users on the network
and press
.
7 Enter the name of the directory where you want to copy the files or
select the default \PUBLIC directory and press
.
The installation program copies each file from the
Administrator’s Install Disks to the network drive and directory
you specified in Steps 5 and 6. The installation program then
decompresses and verifies each file being copied. See the Annex
Manager for DOS Administrator’s Guide for the PC for a list and
description of the Administrator’s files.
8 Power up or reset the Remote Annex 4000. Do not enter test mode.
Enter
Enter
Enter