manualshive.com logo in svg

Bay Networks NA, User Manual, Page: 73 / 88

Share
Download
Bay Networks NA User Manual Download Page 73

4-13

Chapter 4    Using Security Features

Using Remote Access Concentrator Server Tools for Windows NT

Access-Request Attributes

ERPCD/ACP sends Access-Request packets which indicate how the user
connects to the RAC. This information is used by the server as a hint or
a restriction. The available access-request attributes are:

User-Name

Indicates the name of the user that the RADIUS server will authenticate.
An unterminated ASCII string identical to the user name that ERPCD/
ACP retrieves via the user name prompt. You can specify up to 31
alphanumeric characters.

User-Password

Specifies the user password that the RADIUS server will authenticate.

CHAP-Password

Specifies the response value of a CHAP user in response to the password
challenge.

NAS-IP-Address

Indicates the IP address of the RAC authenticating the user or sending an
Accounting packet.

NAS-Port-Type

Specifies the RAC port handling the user session. This value corresponds
to the physical port type. Supported port types:

•

Async (0)

•

ISDN Sync (2)

•

ISDN Async V.120 (3)

•

Virtual (5)

Summary of Contents for NA

























































































Reviews:

No comments