Bay Networks 8000 RAC, Installing Manual, Page: 72 / 148

Installing the Model 8000 Remote Access Concentrator
Chapter 2 Installing the Model 8000 Remote Access Concentrator
2-28
Invoking the Console Monitor
After the image boots, you can invoke the Console monitor by pressing
Return on the console terminal. The following prompt appears:
Console monitor:
At the Console monitor prompt, entering help or ? displays the available
options:
• afd (displays the status of the Automatic Firmware
Download process - used only for the WAN interfaces)
• cli (starts the Command Line Interpreter on the current port)
• dump (from the RAC to the host and reboots)
• help or ? (displays the available options)
• info (displays configuration information for the unit)
• leds (displays the current front panel LED status)
• quit (quits and returns to quiet console)
• reboot filename (reboots the unit)
• rom (returns the RAC to the ROM monitor)
• syslog (displays syslog messages)