Ipump Pain Management System Operator’s Manual
5-13
CD07-19-E4-766
Select the Mode and Units
Unless the pump is configured for a single mode or a single type of unit, you will be prompted to select the
infusion mode and/or units.
Action
Message Displayed
1.
If prompted, press
Enter
to select the current mode displayed or use the
⇑
key
to display the desired mode (
PCA
,
BASAL+PCA
, or
CONTINUOUS
), then press
Enter
.
Example:
SELECT MODE
↑
PCA
2.
Select the units currently displayed, or use the
⇑
key to display the required
units (
mL
,
mg
or
μg
), then press
Enter
.
Example:
SELECT UNITS
↑
mL
3.
If you make a mistake, press the
⇑
key until the correct selection appears.
4.
When the correct selection is displayed, press
Enter
.
Oct02_0719E4766.book Page 13 Friday, August 3, 2007 1:46 PM