Ipump Pain Management System Operator’s Manual
5-3
CD07-19-E4-766
Turn on the Back Light
When the pump is powered by the AC adapter, the display and back light will remain on constantly. When
operating on battery power only, after a period of inactivity the back light and key pad are deactivated to save
energy. To reactivate the back light and key pad, press any key (but not the
START
key) once, then press the
desired action key(s). If the pump is set up for a PCA dose, pressing the
START
key will initiate a PCA dose,
but will not turn on the back light.
Retain Programming Data
The pump automatically saves the prescription settings and tracking information in memory. This
information will not be lost if the pump is turned off. If a pump is restarted, the previous prescription can be
accessed as described in “Reviewing the Therapy History,” 5-37.
Display the Power Status
The power status of the pump is shown in the upper right hand corner of the display by:
Q
A battery symbol (
) to show that the pump is operating on battery power, or
Q
A plug symbol (
) to show that the pump is powered by the Baxter AC adapter.
Oct02_0719E4766.book Page 3 Friday, August 3, 2007 1:46 PM