baxter 2L3107 Operator'S Manual Download Page 126

Page: 126 / 194

Ipump Pain Management System Operator’s Manual

6-4

CD07-19-E4-766

AC ADAPTER
FAILURE

AC FAILURE

Situation: The AC adapter is not functioning correctly.

If another action is occurring at the same time, the pump displays the message

AC FAILURE

in the second line of the screen.

NOTE:

The pump will continue to operate on battery power if the AC adapter fails. If the battery
power is low, the

AC ADAPTER FAILURE

condition could become an ALARM and

stop the infusion.

Action:

Make sure the AC adapter is plugged into the pump and the power outlet
properly.

Try a different power outlet.

If the alert condition persists, replace the AC adapter.

Table 6-1

Alert Messages and Responses — continued

Alert Message

Situation/Action

Oct02_0719E4766.book Page 4 Friday, August 3, 2007 1:46 PM

Summary of Contents for 2L3107



































































































































































































Search results

Summary of Contents for 2L3107

Reviews:

baxter 2L3107, Operator'S Manual, Page: 126 / 194

Search results

Summary of Contents for 2L3107

Reviews: