background image

SAFETY

Do 

have the fire installed by a competent person. In the United Kingdom, installation

must be in accordance with the latest edition of the Gas Safety (installation & use) 
Regulations. In the Republic of Ireland, installation must be in accordance with all 
national and local regulations in force. 

Do 

have the chimney swept prior to installation if it was previously used for solid fuel.

Do 

have the fire installed in accordance with the installation instructions

Do 

provide a minimum clearance of 750mm from the top surface of the hearth to any 

shelf made of wood or other combustible material where the shelf is not more than 
150mm deep. For a shelf deeper than 150mm, add 12.5mm to the clearance for every
25mm of additional shelf depth (See graph1).

Do 

always use a fireguard complying with BS 8423 for the protection of young 

children, the elderly or infirm.

Do 

wait three minutes before attempting to relight if the fire is switched off or the 

flames are extinguished for any reason.(Your fire is fitted with a safety device that will

Page 4

OWNER GUIDE

IF YOU SMELL GAS

DON’T SMOKE
EXTINGUISH ALL NAKED FLAMES
DON’T TURN ELECTRICAL SWITCHES ON OR OFF
TURN OFF THE GAS SUPPLY AT THE METER
OPEN DOORS AND WINDOWS TO GET RID OF THE GAS
IMMEDIATELY CALL THE GAS EMERGENCY SERVICE – SEE YOUR LOCAL TELEPHONE
DIRECTORY

Graph 1. Combustible shelf clearances

Summary of Contents for Classic 2 719













Reviews: